Tuya Smart Life ZigBee Energy Monitor, 1, 2 Channel Bidirectional with Current Sensor, App Monitor Power, 110V, 240V, 50Hz, 60Hz

FAQQ: Why can't my device connect to 2.4G WiFi?A: This is a ZigBee device, it can't connect WIFI signal directly, but require a Tuya ZigBee gateway as hub to work, please make sure you have a Tuya ZigBee gateway to work with this item.Q: Is it ZigBee 3.0 standard Item? A: No. It's Tuya ZigBee device, not ZigBee 3.0. so it can only work Tuya ZigBee Gateway.Q: Is this device compatible with Zigbee2MQTT?A: Sure. But you need to know how to set it up. Internal id: _TZE284_81yrt3lo. You may need to install a quirk: 'github.com/jeverley/zha-device-handlers/blob/ts0601_energy_meter_devices/zhaquirks/tuya/ts0601_energy_meter.py'Q: Is this device compatible with Home Assistant?A: No, it's not compatible. You need configure it with ZigBee2MQTT first, then it can work with Home Assistant. If you don't know how to configure it, please use the Tuya Smart or Smart Life APP.Q: Does the equipment have an overload alarm function?A: Sorry, it doesn't have this function.A Tuya Gateway is RequiredPlease Note this device requires a Tuya ZigBee Gateway to work. Because it can not receive 2.4G wifi signals directly.App can display Channel A and B Real-time power, current, voltage for Forward and Reverse direction clrealy2 Channels For Reverse and Forward direction1 Channle or 2 Channels are available to ChooseAnd you can read from App for each Channel- Real-time total power of 2 channels of reverse and forward direction- Power for Channel A and B Separately(W)- Current(mA)- Voltage(V),- Power factor, and Frequency(Hz)Electricity Statistic for each channel in Forward and Reverse direction.Hourly Elec. (KWh)Daily Elec. (KWh),Monthly Elec. (KWh)-Yearly Elec. (KWh)Technical data:Rated Voltage:100-240V AC 50/60HzMeasurable Current Range: 0.2A-80AWireless Protocol: ZigBeeAmbient Temperature Range:-10°C ~ 55°CElectricity Statistic Channel A , B Separately and Total daily monthly, yearly Reverse and Forward DirectionAutomation , It allows to make a Scene for this device working with other tuya devicesFor example, If Power or Current Is over the Value, then other tuya device starts to work .Wiring Diagram